Battery Use
First Time Use
If using the battery (received with the machine or replacement) for the first time, the battery should be
charged to a full charge before using it on the machine.
Charging
With one end of the charger cable connected to the charger, and the other end plugged in to a 110V-220V outlet,
place the battery in the battery compartment of the charger. Typical charging time is approx. 120 minutes.
The charger has two LED lights to indicate the state of the charger and battery pack, as per the table below:
CHARGING STATUS
(LED ON BATTERY CHARGER)
MEANING
Red
The c
harger is “fast charging” the inserted
battery pack.
Green
Either there is no battery pack on the charger
OR
The battery pack charge cycle is complete and the battery is ready for use.
Below is a copy of the decal on the charger summarizing the above information:
Note that the battery pack will begin to self-discharge when removed from the charger so the longer it remains
off the charger the less its capacity will be when it is finally inserted into a PowerRoll and used.
f the battery pac is ischarge to the poi t at hich the performa ce a spee begi s to rop off
co si erably the battery sho l be charge ischargi g beyo this poi t ca pote tially amage a
ecrease the service life of the battery pac atteries sho l be charge as soo as they are eplete to
obtai the lo gest service life from them atteries that are left i a eplete state ill eteriorate a lose
capacity faster tha batteries that are charge as soo as they are eplete fter a ormal charge cycle the
battery sho l be remove from the charger
7 of 20
2020/
10