PowerFlow ERS MINI, Инструкция по установке и эксплуатации, Страница: 4 / 20

1.1 Validity
Read fully and understand this manual before commencing work
This manual is for electrically skilled persons. The tasks described in this manual may be performed by
electrically skilled persons only. It describes the installation, commissioning, maintenance and warranty
procedures for the following PowerFlow Energy Recovery Systems:
•
PowerFlow E.R.S MINI (ERS - MINI)
1. Introductory Information
1.2 Additional Information
You can find additional information on the design of the complete Energy Recovery system at
www.powerflowenergy.com. For electrical design information such as MCB, RCD and cable sizing, please
reference BS7671.
1.3 Country Grid Parameters
Using E.R.S MINI Inside and Outside the UK
E.R.S MINI is designed to be connected to an AC supply network with a nominal supply of 230V / 50Hz.
ERS MINI is designed to work alongside a grid connected renewable generator such as a wind or solar
system. E.R.S MINI does not connect directly to the generation system and therefore will not effect its
operation or any tariff rate that may be associated with it. In addition, it does not effect any grid connection
standards associated with the generation equipment.
E.R.S MINI can be used outside of the UK provided it is connected to the above stated network supply
standard and complies with any other local electrical standards required for connection.
Please note that if E.R.S MINI is connected to a supply network which is outside of its scope of operation it
will cause irrefutable damage to the device and will not be covered by any factory warranty.
It is important to ensure that the supply voltage and frequency are suitable before connection.
3