background image

 

  

DESCRIPTION 

 
GENERAL  

Powerex Scroll Enclosure Air Compressors are designed to 
supply continuous oil-free air by using the most advanced 
scroll technology. These turn-key packages are extremely quiet 
and offer electronic control that will reduce electrical power 
consumption.                                                                          
The Powerex Oil-less Rotary Scroll Air Compressor has       
advanced scroll compressor technology through the                
development of a completely oil-less unit. The Powerex Scroll 
Compressor offers a dynamically balanced air end which        
insures vibration-free operation. The rotary design permits a 
continuous 100% duty cycle. No oil separation, oil filtration, 
or inlet valves are required on the Powerex Scroll unit. The 
compressor is virtually maintenance free.                              
The Powerex Oil-less Rotary Scroll Air Compressor is based 
on the theory of scroll compression. A scroll is a free standing, 
intricate spiral bounded on one side by a solid, flat plane or 
base. A scroll set, the basic compression element of a scroll 
compressor, is made up of two identical spirals which form 
right and left hand parts. One of these scroll components is 
indexed or phased 180° with respect to the other so the scrolls 
can mesh. Crescent-shaped gas pockets are formed and 
bounded by the spirals and the base plate of both scrolls. As 
the moving scroll is orbited around the fixed scroll, the pockets 
formed by the meshed scrolls follow the spiral toward the   
center and diminish in size. The moving scroll is prevented 
from rotating during this process so the 180° phase            
relationship of the scrolls is maintained. The compressor’s 
inlet is at the outer boundary of the scrolls. The entering gas is 
trapped in two completely opposite gas pockets and               
compressed as the pockets move toward the center. The     
compressed gas is discharged through the outlet at the center 
of the fixed scroll so no valves are needed.

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 
property damage! Retain instructions for future reference. 

 

IN563601AV 

SPECIFICATIONS 

Powerex - 150 Production Drive - Harrison, Ohio 45030 - USA                                                                                                  
1-888-769-7979 - www.powerexinc.com 

10 HP to 20 HP Scroll Enclosure Air Compressors 

Product 

SE Series Enclosed Scroll Air          
Compressor 

Lubrication Grease-filled 

Bearing 

Operating       
Voltages 

3Ø - 208-230/460/575 Volts, 60 Hz 

Compression    
Cycle 

Scroll 

Motor Overload 
Protection 

Motor Protector/Circuit Breaker 

Pressure Settings 

Cut in: 90 psig Cut out: 116 psig                
Cut in: 119 psig Cut out: 145 psig                                      
(High Pressure Units) 

Overpressure     
Protection 

Safety Valve Factory Set and Sealed 

Drive 3V 

Belt 

Agency Approvals  UL/CSA Certified 

Pg 1 

09/12 

Содержание SED1007E













Отзывы: