background image

 

 

 

 

 

 

 

 

5K VA – 12K VA UPS 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User’s and Installation Manual

 

I

EMC Statements 

CISPR 22 

NOTICE: 

Pursuant to CISPR 22 rules, this product has been tested and thereby complies to 

the conditions of a Class A digital device, which have been established for offering 
sufficient protection against dangerous interference for installation in a residential area. 
Installation and use of the equipment should comply with the instructions provided in order 
to avoid such interference due to the amount of radio frequency energy that is radiated and 
generated by the equipment. In spite of this, we cannot assure that a certain amount of 
interference may not occur in some installations. If, by turning on and off, it can be deduced 
that your radio or television reception is found to be influenced by harmful interference 
from the equipment, it is recommended to use one of the following preventive measures: 

 

Place the receiving antenna in a separate location or orientation. 

 

Ensure a greater distance is achieved between the receiver and the equipment. 

 

Ensure that your equipment is connected to an outlet on a separate circuit than the 
receiver. 

 

Contact a technician experienced with radio and TV or a dealer for further assistance. 

Declaration of Conformity Request 

Units labeled with a CE mark comply with the following standards and directives: 

 

Harmonic Standards: EN 50091-1-1 and EN 50091-2 

 

EU Directives:73/23/EEC, Council Directive on equipment designed for use within 
certain voltage limits 

93/68/EEC, Amending Directive 73/23/EEC 

89/336/EEC, Council Directive relating to electromagnetic compatibility 

92/31/EEC, Amending Directive 89/336/EEC relating to EMC 

The EC Declaration of Conformity is available upon request for products with a CE 
mark.

Содержание 12K VA


















Отзывы: