www.powerbox-systems.com
23
A matching process for three servos takes about 30 - 40 seconds. You can follow
the current consumption directly on the screen. When the matching is finished,
use the transmitter stick to run the servos to all five points. A quiet buzz from the
servos in one or other position is normal. If the buzzing stops when you touch the
control surface lightly with your finger, then this shows that the matching process
has worked accurately.
Minor corrections can be carried out at any time under
Manual Matching
. It is a
good idea to check the servo matching occasionally before and during the flying
season, as servos and mechanical systems are always prone to slight drift in use.
8.DOORSEQUENZER
The
Royal SR2
incorporates two independent, fully programmable door sequen
-
cers. For example,
Sequencer A
can be set up to control the undercarriage and
wheel doors, while
Sequencer B
could be used to implement an opening canopy
with latch. The
Sequencer Assistant
is designed expressly for Sequencer A, i.e.
undercarriage and wheel doors.
The Sequencer menu is divided into three parts: sequencer selection and function,
the actual set-up screen for manual set-up using the graphic display, and the Setup
Assistant.
The two illustrations above show the method of starting the sequencer. The dif
-
ference between them is this: in the left-hand picture the
Function
line shows the
standard term for function 2 in sequencer A. The right-hand picture shows the spe
-
cific term
Door FL
(front left) - this is the same function after the Setup Assistant
has completed its work.
