PowerBoss armadillo 10x series, Руководство пользователя

Страница: 18 / 70

PowerBoss, Inc.
Copyright 2008
Armadillo
®
SW/10XV PB # 4100034 / Rev. 01A08
Page 16
THROTTLE
DIRECTIONAL
CONTROL PEDAL
PARKING BRAKE
The throttle adjusts the engine speed from idle to the operating
speed.
•
The throttle should be in the IDLE position when starting the
engine and immediately before shutdown.
•
Full throttle position should be used during operation to en-
sure proper broom speed and dust control.
The directional control pedal controls the speed and direction of
the machine. It is also used for slowing the machine or stopping.
•
To propel the machine forward, apply pressure to the front of
the pedal, increasing pressure to increase speed.
•
To propel the machine backward, apply pressure to the rear of
the pedal.
•
To slow or stop the machine, move the foot pedal into neutral.
•
For emergency stops, move the foot pedal past neutral and
into the opposite position.
Use for emergency stops only! Constant use of this braking
method may result in damage to the drive components.
The sweeper is equipped with a speed limiter. A stop is mounted
under the directional control pedal and can be raised to reduce the
maximum speed.
The hydraulic drum brakes on the two front wheels are operated
by pressing on the brake pedal. The parking brake is cable acti-
vated. To engage the parking brake pull upward on the hand
brake lever located on the left side of the front wall of the opera-
tor’s compartment.
B A S I C O P E R AT I N G C O N T R O L S ( C o n t i n u e d )
CAUTION
Operation, Maintenance and Troubleshooting