To keep your PowerBass Xtreme amplifier running at top performance, choosing the proper loca-
tion it of utmost importance. For this reason the amplifier should be mounted in a location which
will allow air to circulate freely. A clearance of at least 2-inches (5 cm) to all sides of the ampli-
fier is necessary not only for proper cooling, but also for gaining access to the inputs and other
variable controls. Be sure that the power and signal cable connections can enter and leave the
amplifier in a straight line to avoid the risk of kinked wires causing a malfunction
MOUNTING LOCATION
Your PowerBass Xtreme amplifier comes with mounting feet that may need to be attached to the amplifier prior
to installation. Once the feet are in place, use the amplifier as a template and mark the four screw locations.
Use caution to make sure there are no objects behind the installation surface that may become damaged dur-
ing drilling. Remember your car has many hidden electrical wires and various gas, vacuum and brake lines.
Fig.1 Mounting Amplifier
MOUNTING THE AMPLIFIER
•
When connecting ground points, make sure all paint is carefully scraped away from the auto body and
contact is make with bare metal.
•
Use a utility knife to trim away fabric from hole locations before drilling or cutting.
•
When running power cables through sheet metal, be sure to use grommets to properly insulate the
metal edges from the wire insulation.
•
If possible, use tubing through grommets.
5