PowerBase 577161 Скачать руководство пользователя страница 6

Страница: 6 / 37

physical, sensory or mental capabilities

or lack of experience and knowledge,

unless they have been given supervision

or instruction concerning the use of the

machine by a person responsible for their

safety.

- Do not touch the chain.

PREPARATION

WARNING!

- DO NOT operate a chainsaw with one hand!

Serious injury to the operator, assistants,

bystanders or any combination of these

persons may result from one-handed

operation. A chainsaw is intended for two-

handed use only.

- DO NOT use the saw if you are tired, ill

or under the influence of alcohol and/or

drugs.

- Use safety footwear, snug-fitting clothing

and protective gloves, as well as eye,

hearing and head protection (PPE).

- Use caution when handling fuel. Move

the chainsaw at least 10 feet (3m) away

from the fuelling point before starting the

engine.

- DO NOT allow other people to be near when

starting or cutting with the chainsaw. Keep

bystanders and animals out of the work

area.

Содержание 577161






































Результаты поиска

Содержание 577161

Отзывы:

Похожие инструкции для 577161

Бренды по названию

Популярные бренды

PowerBase 577161, Инструкция по эксплуатации

Результаты поиска

Содержание 577161

Отзывы:

Похожие инструкции для 577161

Бренды по названию

Популярные бренды