21
5. While holding the saw unit securely on the ground (one foot
holding down the rear handle, left hand holding the front handle),
pull the start handle four times to warm the engine. At this stage,
the engine will usually not start.
6. Push the choke control (A) in to disengage. (Failure to do this
may cause the engine to flood).
7. Pull the start handle in a smooth action to start the engine, the
engine will usually start after 5 pulls.
If the engine does not start, remove the spark plug, dry it with
a paper towel and replace. Repeat the starting procedure. For
more information, check page 28.
8. After the engine starts, allow the chainsaw to run and warm up
in this position for 30 seconds.
5
4X
6
7
start
30s
8
1
2
3
B
A
a
