23
NOTE:
The oil reservoir should be nearly empty by the time
fuel is used up. Be sure to refill the oil reservoir every time
when refuelling the saw.
With the chainsaw switched off, the chain oil flow can be changed
by inserting a screwdriver in the hole (A) on the bottom of the side
of the clutch. Increase or decrease the oil flow according to your
work conditions. Restart the chainsaw and check that the rate of
flow meets your requirements.
CHECK CHAIN BRAKE
This machine is equipped with a chain brake that will immediately
disable the chain upon the occurrence of kickback during cutting.
The brake is automatically operated by inertia forces, which act
on the weight fitted inside the front guard. This brake can also be
operated manually with the front guard pushed forward to the
guide bar. To disengage the chain brake, pull it back until it touches
the front handle.
a= brake disengaged
b= brake engaged
A
a
b
