Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
52
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Italia
29 REGISTRATION AND COMMISSIONING REPORT
ISSUING DATE
Power System S.r.l.
REGISTRATION AND SETTING
REPORT
SERIAL
NUMBER
service department
Ref:
OQ7.5CRG28
Page:
Distributor
Customer
Compressor Model
Date of installation
Serial Number
Year of manufacture
INSTALLATION
1 Location (compressors room, department, outside, etc.. ..)
2 Atmosphere (dirty, dusty, humid, closed, etc. ..)
3 Ambient temperature with unit working (°C)
4 Kind of installation (compressor, receiver, dryer, filters, etc…)
SETTING
5 Check oil level
OK NO
OK
6 Check tightening of all electric components
OK
NO OK
7 Check power feed:
a) check voltage ± 10%
(Volt)
instrument
b) check voltage auxiliary circuit ± 10%
(Volt)
instrument
8 Check correct direction of rotation:
OK
NO OK
a)
check load current (Amp)
(verify with test certificate)
b) check overloads protection adjustment (motor – fan)
9 Check right operation of electronic panel
OK
NO OK
10 Operate the compressor at max temperature and check after 30 seconds:
a) Check air leaks
YES NO
b) Check oil leaks
YES NO
c) Check regular return on oil recovery of separator
YES
NO
d) Check load and no load pressure (bar Load)
(bar no-Load)
e) Check oil temperature
(°C)
At ambient temperature
(°C)
f) Check oil level
YES NO
HANDOVER OF DOCUMENTS AND INFO TO CUSTOMER
a) explanation of start up/shut down procedure
YES
NO
b) explanation of Service responsibility
YES
NO
c) inquiry of check scheduled service
YES
NO
d) Handover of :
1) Cabinet key
YES NO
2) Instruction manual
YES NO
3) Spare parts manual
YES NO
4) Copy of this report
YES NO
5) CE Certificate
YES NO
Notes:
Customer
Signature
Technicien Signature