Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
10
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Italia
3 IMPORTANCE OF THE MANUAL
BEFORE USING THE COMPRESSOR THE AUTHORISED OPERATORS MUST READ AND
UNDERSTAND ALL PARTS OF THIS MANUAL.
This technical manual of “Instructions for use and maintenance” has been drawn up according to the indications given by the European
Directives, in order to ensure easy and correct understanding of the topics dealt with by the operators authorised to perform the use
and maintenance of the compressor concerned. If, despite the care taken by the manufacturer when drawing up the manual, these
operators find any problem in understanding it, in order to avoid incorrect personal interpretations that might endanger safety, they are
requested to apply promptly to the manufacturer for the correct explanations and any further information.
Before using the compressor, the authorised operators must read and understand all parts of this technical manual of “Instructions for
use and maintenance” and strictly follow all the rules in it, in order to ensure their own safety and that of other people, obtain the best
compressor performance, and ensure the maximum efficiency and long life of all its components. This manual must be at the disposal
of the authorised operators at all times and must always be kept safely, near the compressor.
THIS MANUAL MUST ALWAYS BE AT THE DISPOSAL OF THE AUTHORISED OPERATORS AND
MUST BE KEPT SAFELY, NEAR THE COMPRESSOR.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR ANY DAMAGE TO PERSONS,
ANIMALS AND THINGS RESULTING FROM FAILURE TO OBSERVE THE RULES AND WARNINGS
DESCRIBED IN THIS MANUAL.
THIS MANUAL MUST BE HANDED OVER TOGETHER WITH THE COMPRESSOR IF IT IS
TRANSFERRED TO ANOTHER USER.
THIS MANUAL REFLECTS THE STATE OF THE ART AT THE TIME THE COMPRESSOR WAS SOLD
AND CANNOT BE CONSIDERED INADEQUATE ONLY BECAUSE IT MAY BE UPDATED LATER IN
THE LIGHT OF NEW EXPERIENCE.
IF THE MANUAL IS LOST OR SPOILT, ASK THE MANUFACTURER FOR A NEW COPY, SPECIFYING
THE COMPRESSOR IDENTIFICATION DATA (SEE CE MARKING) AND THE REVISION.
3.1
NOTES FOR CONSULTATION
THE GENERAL DANGER SIGNAL AND THE FRAMED TEXT IN CAPITAL LETTERS DRAW THE
OPERATOR’S ATTENTION TO THE WARNINGS GIVEN IN THIS MANUAL.
N.B. (Nota Bene):
framed text in capital letters.
Bold print:
Highlights some significant sentences in the text.
Italics:
Describes the captions of the figures and tables.
