Power Stand P-eStand Скачать руководство пользователя | Manualshive

Страница: 4 / 64

background image

Page 4

You have just acquired a PowerStand brand P-eStand wheelchair, and we hope you will be completely satisfied with
it.

Before any use, it is essential to read this leaflet in every detail. You will find many tips on use and maintenance to
guarantee you better safety.

PowerStand electric vertical chairs are designed to improve the mobility and health of people weighing up to 120kg.

PowerStand  cannot  be held  responsible  for  any material  and/or  bodily  damage  resulting  from  misuse  of one  of its
electric  chairs.  PowerStand  also  declines  all  responsibility  for  material  and/or  bodily  damage  resulting  from  non-
compliance  with  the instructions  and  recommendations  set out in this user  manual.

If  you  have  a  problem  with  your  powered  stand-up  wheelchair  that  you  are  unable  to  resolve  by  following  the
instructions  and recommendation  in this manual,  please contact  your  PowerStand  dealer.  You will find the  name of
the model  as well as the serial  number  of your  chair,  on the chassis to the right  of the rudder  under  the seat.

Reminder of the safety and maintenance points to be respected imperatively:

1) Security

The stand-up of the chair is practiced exclusively on a flat floor, far from any staircase, access ramp or slope.

2) Settings

This wheelchair must NECESSARILY be adjusted by the dealer who will be able to make the adjustments adapted to
your morphology. Under no circumstances should you attempt to settle it on your own.

3) Annual maintenance

For it to give you satisfaction for a long time an annual review with an authorized dealer is essential in order to control
the safety devices.

4) Physiological benefits of multi-daily Stand-up.

The use of this chair must be done only on medical prescription.

A progressive rehabilitation at the standing position with your Physiotherapist is strongly recommended before the
daily use of a vertical chair.

The benefit of standing will be mainly derived from the frequent alternation of "sit-stand-sit" positions.

This  alternation  reduces  the  risk  of  bedsores.  Verticalization,  frequently  repeated  during  the  day  to  perform  the
gestures  of daily  life, gradually  regulates  intestinal  and urinary  function,  and participates  in the  improvement  of the
articular,  bone  and blood  condition.

5) Waranty

We thank you for returning the Waranty card (located at the end of the booklet) as soon as possible so that we can
intervene in case of necessity...

We are at your disposal for any comments or suggestions and remain at your disposal for any further information.

If you suffer from a visual disability, you can find this user manual in PDF

version on our website

4power4-powerstand.com

.

INTRODUCTION

«
...
2
3
4
5
6
...
»

Содержание P-eStand

































































Отзывы:

Нет отзывов

Похожие инструкции для P-eStand

Бренд: Magic Mobility Страницы: 12

Бренд: Kartus Страницы: 16

Бренд: Karman Healthcare Страницы: 6

Бренд: Karma Страницы: 44

Premium VCWK9ASZ

Бренд: Vitea Care Страницы: 20

Power Chair HS-1500

Бренд: CTM Страницы: 20

Бренд: BIOS LIVING Страницы: 6

Бренд: HD Страницы: 2

Бренд: TGA Страницы: 8

Бренд: HMN Страницы: 12

Бренд: EZee Life Страницы: 6

Бренд: FREERIDER Страницы: 21

Бренд: NRS Healthcare Страницы: 2

Бренд: AAT Страницы: 64

Бренд: Handicare Страницы: 13

Бренд: Gate Страницы: 8

Бренд: KD Страницы: 36

Бренд: Eclipse Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды