Power Stand P-eStand, Руководство пользователя

Страница: 11 / 64

Page 11
Positioning drive system and anti-tilt device according to seat depth:
Table 1:
Positionnement motorisation & anti-bascule
Seat depth 40 – 42 cm 44 – 46 cm 48 – 50 cm
Motorization position Front Middle Rear
Anti-toggle position Front Middle Rear
To ensure excellent stability of the chair in all conditions
of normal use, it is necessary to adapt the position of
the drive systems and anti-tilt devices according to the
depth of seat
•
R
emove the battery cover and battery to access
the attachment nuts of the drive systems
•
R
emove the 2 nuts from the drive system and
place it in the appropriate position according to
the seat depth (see Table 1) (see Figure 11).
•
P
ut the 2 nuts, the battery and its hood on both
sides of the chair
Figure 11 : motorization position adjustment.
•
R
emove the two tilting screws (see Figure 12) on
both sides of the chair
•
P
lace the anti-tilt device in the position adapted
to the seat depth (see table 1)
•
R
eplace the two screws on both sides of the chair
Figure 12 : anti-toggle position setting