Press
UP
for
higher speed
setting / higher
sensitivity
Highest tone level
(FASTEST)
Middle range tone level
(MEDIUM)
Lowest tone level
(SLOWEST)
Press
DOWN
for
lower speed /
lower sensitivity
10
1
Figure 1
3. Once you have made all desired setting changes, press and release the PROGRAM button to save your
settings and exit program made. You will hear a series of beeps and the LED will return to flashing
GREEN
.
FUNCTION 3: Up Sensitivity Adjustment
Controls the operation of the Auto Up feature. If the unit continues to run once retracted, increase the
sensitivity. If the unit stops running prematurely, decrease the sensitivity.
NOTE
:
Default settings are in the middle of the range. Tone increases with level (1-10).
FIG. 1
1. Depress and hold the PROGRAM button for 6 seconds until LED flashes
RED
and 2 chimes are heard
followed by 3 beeps.
2. Press the UP for higher sensitivity setting and DOWN for lower sensitivity setting.
FIG. 1
3. Once you have made all desired setting changes, press and release the PROGRAM button to save your
settings and exit program mode. You will hear a series of beeps and LED will return flashing
GREEN
.
FUNCTION 4: Down Sensitivity Adjustment
Controls the operation of the Auto DOWN feature. If the unit turns off prematurely during deployment,
decrease the sensitivity. If the unit continues to run once anchored, increase the sensitivity.
NOTE
:
Default settings are in the middle of the range. Tone increases with level (1-10).
FIG. 1
1. Depress and hold the PROGRAM button for 6 seconds until LED flashes
RED
and 2 chimes are heard
followed by 4 beeps.
2. Press the UP for higher sensitivity setting and DOWN for lower sensitivity setting.
FIG. 1
3.
Once you have made all desired setting changes, press and release the PROGRAM button to save your
settings and exit the program mode. You will hear a series of beeps and LED return flashing
GREEN
.
FUNCTION 2: Key-Fob Speed Adjustment
NOTE
:
Default settings are set to 70% of the highest speed level. Tone increases with level (1-10).
FIG. 1
1. Depress and hold the C-Monster PROGRAM button for 6 seconds until LED flashes
RED
and 2 chimes
are heard followed by two beeps.
2. Press the UP button for higher speed setting and DOWN button for lower speed setting.
FIG. 1
