Power Innovations INTegral Line 650 VA, Руководство пользователя

Страница: 13 / 22

INTegral Line-Interactive Uninterruptible Power Supply Unit
—650 VA
Power Innovations 13
4—Operating the System
While operating the system, be sure that it has adequate ventilation space. Be sure the operating area is left free of clutter
or other objects that may block ventilation slots.
Avoid placing liquids or flammable gases near the system during operation.
Keep the system far away from sources of natural or artificial heat (ie. heaters, direct sunlight) and make sure the system
is not overloaded.
During routine system operation:

Ensure that no liquids of any kind enter the UPS system.
 Do not block off ventilation openings in the system’s casing.

Keep objects from within four (4) inches of all visible ventilation holes in the UPS. The added space helps the
system ventilate.

Do not disconnect the main cable or unplug the system from the wall outlet unless all breakers have been
turned OFF. This will cause the system to switch to backup mode and drain the batteries.
ELECTRICAL WARNING
Disregarding the preceding advice may directly cause or contribute to injury.
Caution
Disregarding the preceding advice may harm the system and void the system warranty.
4.1—System Power-ON
Once the UPS is connected to the power source, the LED light will blink, indicating that the inverter can be switched ON.
Press the LED light button for two (2) seconds to turn ON the UPS. As the UPS turns ON, the green LED will illuminate
solidly and the buzzer will beep twice.
Note
If the button is only briefly pressed, the light will illuminate for about five (5) seconds and then turn
OFF again. The system will ventilate but not operate fully. This limited operation mode protects the
system from accidentally being turned ON as it is jostled or bumped.
Make sure to press the button for at least two (2) seconds. When the system is ON, it will beep twice.