Power-flo PF4NC2824SS Series, Инструкция по установке, обслуживанию и запасным частям

Страница: 3 / 24

3
Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
Specifications
DISCHARGE
4” 125 lb., ANSI, Flange Horizontal
LIQUID TEMPERATURE
104°F
MOTOR HOUSING Cast Iron, Class 30
VOLUTE
Cast Iron, Class 30
IMPELLER
2 vane open type with pump out vanes on back
side, Dynamically balanced, ISO G6.3,
Cast Iron, Class 30
SOLIDS HANDLING 3” spherical
SHAFT
Stainless steel
SEAL PLATE Cast Iron, Class 30
PAINT
Air dry enamel
SQUARE RINGS
Buna-N
HARDWARE Stainless steel
SEAL
Single mechanical, Inboard, Oil Filled reservoir,
with Secondary Exclusion seal
Silicon Carbide/Buna-N
UPPER BEARING
Single row, ball, oil lubricated
LOWER BEARING Single row, ball, oil lubricated
POWER CORD
25 Ft. Cord. Epoxy sealed housing with
secondary Pressure grommet for sealing and
strain relief.
MOTOR Class B Insulation, Oil Filled
SINGLE PHASE
Permanent Split Capacitor (PSC)
Includes overload protection in motor
THREE PHASE
230/460 Volt. Dual Voltage. Requires overload
protection to be included in control panel.
Series: PF4NC2824SS
PF4NC2834SS, PF4NC2844SS
PF4NC3724SS, PF4NC3734SS,
PF4NC3744SS, PF4NC3764SS,
PF4NC5024SS, PF4NC5034SS,
PF4NC5044SS, PF4NC5064SS
2.8, 3.7 & 5HP,
1750RPM, 60Hz
Submersible Non-Clog
PF4NC-SS Non-Clog Pumps