Power-flo PF4NC2824SS Series, Инструкция по установке, обслуживанию и запасным частям

Страница: 11 / 24

11
Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
Models - PF4NC2824SS, 3744SS,
3734SS, 3744SS, 3754SS, 3764SS,
5024SS, 5034SS, 5044SS, 5054SS,
5064SS
16. Pull wires through large opening
in motor housing (4) an connect wires
with cord (22) in Conduit box (33) per
schematic in Figure 5.
17. Refill with cooling oil and place o-ring
(35) and conduit box (33)onto motor
housing (4). Place cap screws (36) and
washers (37) through conduit box into
motor housing and tighten to 16 ft lbs.
Cable Assembly:
18. For ALL Models - Check power cord
(22) for cracks or damage and replace
if required. Insert one friction ring (24),
grommet (25), one friction ring (24), and
gland nut (23) into motor housing (4) or
conduit box & cable assembly (33) and
torque gland nut (23) to 15 ft lbs.
19. on models PF4NC2834SS, 2844SS,
2854SS, refill with with cooling oil and
replace pipe plug (20).
Power Cable Motor Lead Number
Green (Ground) Green
Black
1
White 2
Flag Terminal Capacitor
Flag Terminal Capacitor
Power Cable Motor Lead Number
Green (Ground) Green
Black
1 & 7
Red 2 & 8
White 3 & 9
4, 5 & 6 Together
Power Cable Motor Lead Number
Green (Ground) Green
Black
1
Red 2
White 3
4 & 7 Together
5 & 8 Together
6 & 9 Together
IMPORTANT!
-- WIRE COLORS MAY
VARY. USE IDENTIFICATION TAG ON
EACH LEAD.
Figure 5 - 115/230 Volt AC, 1Ph
Models: PF4NC2824SS, 3724SS, 5024SS
Service
Figure 4
Figure 5 - 208/230 Volt AC, 3Ph
Models: PF4NC2834SS,3734SS, 3764SS,
5034SS, 5064SS
Figure 5 - 460 Volt AC, 3Ph
Models: PF4NC2844SS, 3744SS, 5044SS
PF4NC-SS Non-Clog Pumps