6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
This tool is only for use on 120 V (single phase) and is equipped with a
three-prong grounded power supply cord and plug. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly
grounded. If the tool should electronically malfunction or break down,
grounding provides a low resistance path to carry electricity away from
the user.
a.
Never remove the grounding prong or modify the plug in any way, as
this will render the tool unsafe.
b.
Do not use any adapter plugs.
POWER CORD SAFETY
1.
Insert the power cord plug directly to the power supply whenever
possible. Use extension cords or surge protectors only when the tool's
power cord cannot reach a power supply from the work area.
a.
When operating a tool outside, use an outdoor extension cord
marked W-A or W. These cords are rated for outdoor use and reduce
the risk of electric shock.
2.
Do not operate this tool if the power cord is frayed, damaged or poorly
spliced, as an electric shock may occur, resulting in personal injury or
property damage.
3.
Discontinue use if a power cord feels more than comfortably warm while
operating the tool.
4.
Keep all connections dry and off the ground to reduce the risk of electric
shock. Do not touch the plug or wiring with wet hands.
5.
Prevent damage to the power cord by observing the following:
a.
Place the power cord in a position that prevents it from coming into
contact with the tool or getting caught by the workpiece. The cord
should always stay behind the tool.
b.
Do not pull on the cord to disconnect the plug from an outlet.
c.
Keep the cord away from heat, oil, sharp edges or moving parts.
d.
Never carry the tool by the power cord
9027814
MINI BENCH-TOP DRILL PRESS
V1.0
www.princessauto.com / 1-800-665-8685
Page 8
