Problem(s)
Possible Cause(s)
Suggested Solution(s)
Overheating
1.
Forcing machine to work
too fast.
2.
The drill bit is dull or
damaged
3.
Blocked motor housing
vents.
4.
Extension cord is too long
or wire gauge is too thin.
1.
Allow machine to work at its own
rate.
2.
Keep the drill bit sharp. Replace as
needed
3.
Blow dust out of motor using
compressed air.
4.
Eliminate the use of an extension
cord. If an extension cord is needed,
use one with the proper diameter for
its length and load.
V1.0
MINI BENCH-TOP DRILL PRESS
9027814
Page 15
www.princessauto.com / 1-800-665-8685
