Power Fist 9007824, Руководство пользователя

Страница: 6 / 32

4. Keep hands and fingers away from the work area. Any part of body
contacting the screwdriver's working parts could cause an injury.
5. Do not touch an operating motor. Motors can operate at high
temperatures and can cause a burn injury.
6. The material and the motor housing can get very hot during operation.
Stop work until the screwdriver and the driver bit both cool down to a
safe temperature.
7. Do not cover the air vents. Proper cooling of the motor is necessary to
ensure normal life of the tool.
8. Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source. Contaminated
or moist air will gradually damage the tool.
2. Install an in-line shutoff valve or regulator to allow immediate control over
the air supply in an emergency, even if a hose is ruptured.
3. Discontinue tool use if it does not work properly or air is leaking. Tag or
mark the tool as ‘defective’ or ‘out of service’ until repaired.
4. Check the manufacturer’s maximum pressure rating for air tools and
accessories. Compressor outlet pressure must be regulated to never
exceed the maximum pressure rating of the tool (see Specifications).
Exceeding the maximum PSI rating can create a bursting hazard, causing
injury and property damage.
5. Attach all accessories properly to the tool before connecting the air
supply. A loose accessory may detach or break during operation.
6. Never use oxygen, combustible gas or any other bottled gas as a power
source. Any power source other than an air compressor could cause an
explosion and serious personal injury.
7. Turn OFF the valve and discharge any remaining air pressure after each
use or before adjusting the tool.
8. Do not leave the air tool unattended with its compressed air supply on.
Turn off the compressed air supply and bleed the air tool of any remaining
compressed air before leaving the air tool unattended.
9007824 PISTOL-GRIP AIR SCREWDRIVER V1.0
www.princessauto.com / 1-800-665-8685 Page 6