8976904
1.45 GPM @ 1,600 PSI Electric Pressure Washer
V4.0
14
For technical questions call 1-800-665-8685
source. Squeeze trigger to
remove remaining air.
6.
Replace with shorter length of
high-pressure hose until water
flows.
No or low
pressure (after
period of
normal use).
1.
Worn seal or
packing.
2.
Worn or obstructed
valves
3.
Worn unloader
piston.
4.
Worn start valve.
Have parts cleaned or replaced by
authorized dealer.
Water leaking
at spray gun/
spray wand
connection.
1.
Worn or broken O-
ring.
2.
Loose hose
connection.
1.
Check and replace O-ring.
2.
Tighten hose connection.
Water leaking
at pump.
1.
Loose connections.
2.
Piston packing is
worn.
3.
Worn or broken O-
rings.
4.
Pump head or tubes
damaged from
freezing.
1.
Tighten connections.
2.
Have parts cleaned or replaced
by authorized dealer.
3.
Have parts cleaned or replaced
by authorized dealer.
4.
Have parts cleaned or replaced
by authorized dealer.
Pump pulsates. Nozzle obstructed.
See Check Spray Wand and
Adjustable Nozzle section.
Motor will not
start.
1.
Plug not properly
inserted in outlet.
2.
Faulty outlet.
3.
Thermal switch has
tripped.
1.
Push plug into outlet until
seated.
2.
Use different outlet and have
electrician replace the faulty
outlet.
3.
Turn off the unit and wait
several minutes to allow the
motor to cool.
