8976904
1.45 GPM @ 1,600 PSI Electric Pressure Washer
V4.0
10
For technical questions call 1-800-665-8685
2. Hold the spray gun with both hands.
3. Direct the nozzle of the chosen accessory away from you towards the
surface to be cleaned.
4. Unlock the trigger and press it until a constant amount of water flows
through the nozzle, allowing air trapped in the hose to escape.
5. Release the trigger.
6. Turn on the ON/OFF switch.
7. Hold the spray gun with both hands. Direct the water jet to the object to be
cleaned and press the trigger.
8. Release the lever of the trigger gun. The device will switch off and stop the
water jet. High pressure remains in the system.
WARNING! Beware of kickback when pressing the trigger!
INTERRUPTING OPERATION
1. Release and lock the lever of the trigger gun.
2. Put the trigger gun with the spray lance into the parking position.
3. During longer breaks (more than 5 minutes), turn the device off using the
ON/OFF switch.
AFTER OPERATION
1. Release the lever of the trigger gun.
2. Turn off the ON/OFF switch.
3. Disconnect the plug from the socket.
CAUTION! Only separate the high-pressure hose from the trigger gun or the
device when there is no pressure in the system.
4. Turn off the water supply.
5. Squeeze the trigger gun lever to release any remaining pressure in
the system.
6. Release and lock the lever of the trigger gun.
NOTICE! When disconnecting the supply or high pressure hose, warm water
may leak from the connection after operation.
7. Detach the device from the water supply.
