8964330
OBD2 Multi-Function Digital Heads Up Display
V4.0
16
For technical questions call 1-800-665-8685
HEADS-UP DISPLAY (HUD)
The display screen information can be set-up to reflect off the inner windshield
for easy reference without affecting your view of the road.
Due to the limited lumen output, this function is best used at night, as the image
may be washed out on a sunny day.
1. Choose the display configuration you wish to view while driving.
2. Go to the configuration screen and select display settings.
3. Choose Mode, then select Reversed. The display will now be upside down.
4. Push the HUD unit (C) away from you until it is horizontal.
5. You will see the display reflected off your windscreen. Adjust the
brightness until you can see the information, but it does not interfere with
your view of the road.
MANUAL WAKE UP FUNCTION
You can manually start the unit without the motor running. This is necessary
with some engines, as the DTC codes cannot be cleared with a running engine.
1. Turn the vehicle key to the ON position, but do not start the engine.
2. Press one of the four button once to bring the unit out of hibernation.
3. Press a button again within a minute to prevent it from reentering
hibernation.
4. Once you have finished your tasks, press one of the four buttons once and
it will reenter hibernation in one minute.
You can also turn off the unit while running the engine by following step 4.
FUEL CONSUMPTION DATA
Obtaining the correct fuel consumption result requires two factors:
1. The fuel consumption calculation requires the selection of the correct fuel
type in
System Setting – Fuel Type
. Chose Gasoline or Diesel based on
your fuel system.
2. The fuel consumption data calculation is based on either the airflow data or
the turbine/inlet pressure. A vehicle without either of these systems will not
display the correct fuel consumption.
