Power Fist 8964330, Руководство пользователя

Страница: 11 / 40

V4.0 OBD2 Multi-Function Digital Heads Up Display 8964330
Visit www.princessauto.com for more information 11
a. Left to Right Interval.
The LEDs will remain dark until you reach 4,000 RPM. Then for every
100 RPM after that, another LED will light up, until all 10 LEDs are lit.
When the upper RPM limit is reached, the LEDs will flash.
• Interval chosen x 10 = Start of Lower Limit Value
• STEP 100 RPM x 10 = 1,000 RPM
•
5,000 RPM – 1,000 RPM = 4,000 RPM
b. Outside to Middle
The LEDS will remain dark until you reach 4,000 RPM. The LED at
each end will light up. Then for every 200 RPM after that another LED
on each side will light up until the last two LEDs in the middle will
light up. When the upper RPM limit is reached, the LEDs will flash.
• Interval chosen x 5 = Start of Lower Limit Value
• Step 200 RPM x 5 = 1,000 RPM
•
5,000 RPM – 500 RPM = 4,500 RPM
MULTICOLOUR
The MULTCOLOR option is an alternate method of
displaying the step order with the LEDs. This replaces
the SHOW MODE option.
1. Set MULTCOLOR to ON.
2. When the lowest alarm step is reached, all 10
LEDs will light up in a single colour. As each
subsequent step is reached, the colour will
change in the following order: Interval chosen x
10 = Start of Lower Limit Value
• Step 200 RPM x 10 = 2,000 RPM
•
5,000 RPM – 2,000 RPM = 4,000 RPM
DIMMER
Changing the three DIMMER options (Red, Green and Blue) changes the colour
gradation of the LEDs.
Colour RPM
Green 4,000
Light Green 4,200
Yellow 4,400
Orange 4,600
Red 4,800
Flashing 5,000