V4.0
OBD2 Multi-Function Digital Heads Up Display
8964330
Visit www.princessauto.com for more information
13
There are three functional tests: drive, acceleration and braking. The vehicle must be
in motion for these tests to work. You can only perform one test at a time.
1. Select Start and choose one of the three tests. It will appear across from
the word MODE.
a. RST 0-100km/h will test how long it takes your vehicle to reach 100
km/h
b. RST 100-0km/h will test how quickly your vehicle can brake.
c. RST 400m will test your vehicle’s rate of acceleration.
2. Drive until you’ve attained the distance or speed required for the test.
3. Select play and choose the test you wish to view. A new screen will appear
with the data for the test. You can either play it back or save it.
DIAGNOSE
IMPORTANT! Some older vehicles may not provide data results in the
Diagnose screen.
Press SCAN DTCS and the unit will display any Diagnostic Trouble Code (DTC)
errors detected.
Select and press CLEAN DTCS to remove the current list of DCTS errors. You
will not be able to retrieve them.
Press Data Stream to open a submenu that will display the current error codes
found.
Dtc_Cnt.
0DTCS
Count the number of DTC that are not cleared.
Dtc Frzf
0DCTS
Frozen of DTC
Fig. 9
