V4.0
10 Ton Hydraulic Porta-Power Autobody and Frame Repair Kit
8667834
Visit www.princessauto.com for more information
7
IDENTIFICATION KEY
A Carrying Case
B Hydraulic Pump and Hose
C Ram
D Extension tubes: 3-7/8 in. (98 mm), 7-3/4 in. (197 mm), 11-3/4 in.
(299 mm) and 21-5/8 in. (549 mm)
E Serrated Saddle
F
Duckbill Spreader
G Flex Head
H Flat Base
I
Ram Toe
J
Body Toe
K Wedge Head
L 90º V-Head
M Male Connector
ACCESSORIES
Serrated Saddle
(E) – The default attachment. The saddle’s rough surface will
grip a metal workpiece.
Flex Head
(G) – The rubber head surface is suitable for popping dents in sheet
metal or working the inner curve of a metal surface without marring it.
Wedge Head
(K) – Fits into hard-to-reach areas to push out small dents. Also
suitable for working on angled workpieces.
V-Head
(L) – The four peaks and interior ‘steps’ catch and hold angled
workpieces to focus the ram’s pushing force without slipping.
Body Toe
(J) – The offset toe can reach difficult locations partially blocked
by the vehicle’s structure. Substitute for the flat base when only a narrow space
is available.
Ram Toe
(I) – Offset toe used in conjunction with body toe when using the ram
as a spreader. Screws onto the ram threads.
Fig. 1
