Power Fist 8532657, Руководство пользователя

Страница: 3 / 24

2.3 GPM 3,000 PSI Pressure Washer
Visit www.princessauto.com for more information 3
8532657 V 3.04
WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are factors
that cannot be built into this product, but must be supplied by the operator.
NOTE:
Keep this manual for safety warnings, precautions, operating, inspection, and
maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Do not use in the presence of flammable gases or liquids.
a. Do not use pressurized starting fluids with the unit, because the vapors are flammable.
3. Keep anyone not wearing the appropriate safety equipment away from the work area.
4. The unit should be located as close as possible to the water supply.
5. Locate the unit on a solid and level surface so that the engine and pump crankcase oil
lubricates the components properly.
6. Avoid areas where water can build up in the working area.
7. Locate the unit in a well-ventilated area and away from flammable materials or fumes.
8. Locate the unit so that the operator has easy access to the pressure washer and its controls.
9. Locate the unit so that it is protected from external damage.
10. To prevent damage and excessive hose wear, locate the pressure washer so that the hose
does not cross traffic areas.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or the
American National Standards Institute (ANSI) when using the equipment.
1. Head Protection
a. Always wear impact-resistant safety goggles that provide both front and side protection.
b. Wear earplugs or hearing protector earmuffs if the engine or work environment is noisy.
2. Gloves
a. Wear gloves that should provide protection based on the thermal (heat) levels generated
by the unit.
3. Protective Clothing
a. Wear protective clothing designed for the work environment and the engine.
4. Foot Protection:
a. Wear steel-toed footwear or steel toecaps to prevent injury from falling objects.
b. Non-skid footwear is recommended for maintaining proper footing and balance.
5. Control the unit, personal movement, and the work environment to avoid personal injury or
damage to the pressure washer.
a. Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid
entanglement with the unit. Traumatic amputation or severe laceration could result.
b. Do not operate any tool or machine when tired or under the influence of drugs, alcohol,
or medications.
c. Do not overreach when operating the unit. Proper footing and balance enables better
control of equipment in unexpected situations.