Multi-Purpose Oscillating Tool
5
For technical questions call: 1-800-665-8685
8383853
V 2.0
5. Use clamps or other practical ways to secure and support the work
piece to a stable platform. Holding the work piece by hand or against
your body is unstable and may lead to loss of control.
6. Do not allow the spray to strike you and do not spray toward people or
animals. Do not spray the tool itself or any electrical source.
ELECTRICAL SAFETY
1. Disconnect power supply. Disconnect from power supply when not in
use, before cleaning, servicing or changing any parts or accessories.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces such as pipes,
radiators, cooking stoves and refrigerators. There is an increased
chance of electrical shock if your body is grounded.
3. Double insulated tools are equipped with a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insulation eliminates the
need for a three wire grounded power cord and grounded power
supply system.
4. Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove
the grounding prong or modify the plug in any way. Do not use any
adapter plugs. Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. If the tool should electronically
malfunction or break down, grounding provides a low resistance path
to carry electricity away from the user.
5. Do not abuse the cord. Never use the cord to carry the tools or pull
the plug from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts. Do not operate this tool if the power cord is frayed
or damaged. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock. Do not modify the plug in any way.
