3/8 in. dr Composite Air Ratchet
12
For technical questions call: 1-800-665-8685
8344103
V 2.0
Problem(s)
Possible cause(s)
Suggested solution(s)
Air flow blocked by dirt.
Excessive air tool oil in tool or
buildup of shipping grease.
Run tool under no load for short
periods of time until exhaust
clears.
Tool will not run. Air flows freely
from exhaust.
O-rings throttle valve dislodged
from seat inlet valve.
Have a qualified technician
replace the O-ring.
Damage to, or excessive wearing
of internal parts.
Bring to service centre.
Tool will not shut off.
O-rings throttle valve dislodged
from seat inlet valve.
Have a qualified technician
replace the O-ring.
Loss of power or erratic
performance.
Excessive drain on the air line.
Check the air supply. Ensure the
tool is connected to the proper
diameter air hose with no kinks
or restrictions and that the
fittings are connected properly.
Moisture or restriction in the air
hose.
Incorrect size or type of hose
connectors.
Air compressor has insufficient
flow.
Ensure that the tool is
connected to a compressor that
has a rated flow matching the
tool.
