11 AMP 7 in. Variable Speed Polisher/Sander
7
Visit www.princessauto.com for more information
8336349
V 2.
2
Length of Cord in Feet
115V
25 ft
50 ft
100 ft
150 ft
0-2A
18
18
18
16
2-3A
18
18
16
14
3-4A
18
18
16
14
4-5A
18
18
14
12
5-6A
18
16
14
12
6-8A
18
16
12
10
8-10A
18
14
12
10
10-12A
16
14
10
8
12-14A
16
12
10
8
14-16A
16
12
10
8
16-18A
14
12
8
8
18-20A
14
12
8
6
LOW VOLTAGE
Low voltage may cause overheating due to higher power current being drawn to the tool that will
shorten the motor life.
An extension cord may cause a drop in power to the tool if too long or the amperage rating is not correct. This may
result in the following:
1. The tool will not activate when switched on.
2. The tool may switch on, but fails to maintain power when applied to a workpiece.
3. The tool may overheat, possibly starting a fire.
Test the tool by plugging it directly to the power supply. If it powers on, change the extension cord with the correct
rating and as short as needed. The workpiece may also need to be relocated closer to the power supply.
ELECTRIC POWER TOOL PRECAUTIONS
WARNING! Immediately switch off the power tool if any of the following occurs:
• Malfunction of the plug, receptacle or damage to the power supply cord.
• The switch or trigger is broken.
• User sees or smells smoke.
• The user smells the odor of scorched insulation.
• The sander/polisher pad
moves in an unsafe way.
1. Ensure power supply matches the voltage of the tool’s motor (see Specifications).
2. Make sure the power switch is in the OFF position before connecting the tool to the power supply.
3. Do not place the tool down until the sander/polisher pad has stopped moving. The sander/polisher
pad may catch the surface of work material and wrench itself free, causing injury to the user or
others in the work area.
4. Never use a tool with a cracked or worn sander/polisher pad. Change the pad before using.
