11 AMP 7 in. Variable Speed Polisher/Sander
10
For technical questions call: 1-800-665-8685
8336349
V 2.
2
TOOL USE AND CARE
1. Use the correct tool for the job. Do not force a tool or attachment to do the work of a larger industrial tool.
Maximize tool performance and safety by using the tool for its intended task.
2. This tool was designed for a specific function. Do not modify or alter this tool or use it for an
unintended purpose.
3. Securely hold this tool using both hands, unless it is designed for single hand use. Using a tool with only
one hand can result in loss of control.
4. Maintain tools with care (see Maintenance).
5. Remove adjusting keys and wrenches from the tool before operation or connecting it to a power source. A
wrench or key that is left attached to a rotating part of the tool increases the risk of personal injury.
6. Avoid unintentional starts. Be sure that the throttle/ignition switch is in the neutral or OFF position when not
in use and before connecting it to any power source.
7. Do not carry the tool with fingers near or on the trigger/switch.
UNPACKING
1. Carefully remove the parts and accessories from the box. Retain packaging material until you have carefully
inspected and satisfactorily installed or operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tools and accessories were not damaged while shipping.
WARNING! Do not operate the tool if any part is missing. Replace the missing part before operating. Failure to
do so could result in a malfunction and serious personal injury.
PARTS IDENTIFICATION
Contents:
1. Motor Housing
2. Speed Control Dial
3. Trigger ON/OFF Switch
4. Polishing Bonnet
5. Hook & Loop Sanding Pad
6. Polishing Pad
7. Polishing Pad Arbor
8. Spanner Wrench
9. ‘D’ Handle
