Power Fist 8095903, Руководство пользователя

Страница: 8 / 11

Driving Fasteners
Contact fire operation (bump fire):
For contact fire operation, hold the trigger and depress the contact arm
against the work surface.
Procedure: A. Hold the trigger. B Depress the contact arm.
Warning: The operator must not hold the trigger pulled on contact trip
tools except during fastening operation, as serious injury could
result if the trip accidentally contacted someone or something
causing the tool to cycle.
Warning: Keep hands and body away from the discharge area of the tool.
Operator note: Do not press the tool against the work surface with
excessive force. Instead, allow the tool to recoil off the
work surface to avoid a second unwanted fastener.
Maintanence
Warning: Do not use gasoline or similar highly flammable liquids to
clean the nailer. Vapour could be ignited by a spark causing an
explosion. Tar and dirt may build up on the nose and trip lever.
This can prevent correct operation. Remove any buildup with
kerosene #3 fuel or diesel fuel. Do not immerse the nailer into
these solvents beyond the height of the nail heads, to avoid
getting the solvent into the drive cylinder. Dry off the nailer
before use. Any oil film left after cleanup will accelerate the
tar build-up, and the nailer will require more frequent re-
cleaning.
Note: Solvents sprayed on the nose to clean and free up the trip may have
the opposite effect. The solvent may soften the tar on the shingles
and cause tar build-up to be accelerated. Dry operation is better, as
noted above.
Note: Do not fire the nailer when it is empty.
8095903manual 11/4/05 3:06 PM Page 8