Power Fist 8095903, Руководство пользователя

Страница: 2 / 11

Before Use
• Approved eye protection should always be worn by the operator and
others in the work area
• Always disconnect the air supply before making adjustments, servicing
the tool or clearing jams, and when the tool is not in use
• Never place a hand or any other part of the body in the staple discharge
area at the tool while air supply is connected
• Do not use oxygen or combustible gases as a power source for this tool
• Ear protection may be required in some environments
Safety Instructions
Warning: To avoid severe personal injury or property damage before
using the tool, read carefully and understand the following
safety instructions:
1. Wear safety glasses or goggles. The user and/or employer must ensure
that proper eye protection is worn at all times. Eye protection
equipment must conform to the ANSI or CSA requirements, and
provide both frontal and side protection. Note: non-side shielded
spectacles and face shields alone do not provide adequate protection.
2. Ear protection may be required in some environments. As the working
condition may include exposure to high noise levels that may lead to
hearing damage, ensure that necessary hearing protection is used by the
operator and others in the work area.
3. Do not use any air source beside an air compressor. The tool is
designed to operate on compressed air. Do not operate the tool on any
other high pressure gas, combustible gases (such as oxygen or
acetylene) since there is risk of explosion.
4. Do not operate the tool near a flammable substance.
5. Do not use the wrong fitting. The connector on the tool must not hold
pressure when air supply is disconnected. If a wrong fitting is used, the
tool can remain charged with air after disconnecting and thus be able to
drive a fastener even after the air line is disconnected, possibly causing
injury.
8095903manual 11/4/05 3:06 PM Page 2