Power Fist 8095903, Руководство пользователя

Страница: 4 / 11

16. When using the tool outside or on elevated locations such as roofs,
start fastening at the lower part and gradually work your way up.
Fastening backward is dangerous as you may loose your footing.
Secure the hose at a point close to the area you will be working.
Accidents may be caused due to the hose being pulled inadvertently
or getting caught.
17. Never use a tool that is defective or a performs abnormally. Never
actuate the tool into free space. This will avoid any hazard caused by
free flying fasteners and excessive strain on the tool.
Additional Precautions
• Do not use the tool as a hammer
• Always carry the tool by the handle, never carry the tool by the air hose
• The tool must be used only for the purpose it was designed
• Never clamp the trigger in locked operation position
• Keep the tool in a dry place out of reach of children when not in use
• Do not use the tool without safety warning label
• Do not modify the tool from original design or function without
approval by the manufacturer
Specifications
• 11" high (280 mm)
• 4-3/8" wide (112 mm)
• 11" long (280 mm)
• 5.95 lbs (2.7 kg)
• Operating pressure: 70 to 120 PSI
• Do not exceed 120 PSI
• Includes hex wrench and oil
Nail specifications
• 7/8" to 1-3/4" long
• 11 gauge, 0.120" wide, wire-collated
• Smooth shank type
• Air consumption @ 90 PSI: 5.5
CFM average
• Holds 120 nails
8095903manual 11/4/05 3:06 PM Page 4