8723728
12V Red/Amber Magnetic Tow Light Kit
V4.0
8
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
BULB REPLACEMENT
1. Allow time for the burned-out bulb to cool.
2. Pry the lens covering off the light with plastic pry tool to prevent damage.
Metal tools may be used, but they can scratch or damage the tow light.
3. Press and twist the bulb counterclockwise to remove. Note the position of
the bulb’s pins when removing it.
4. Insert a new 12V/21/5W bulb into the socket with the pins in the
correct orientation.
5. Push down and twist clockwise to lock it in place.
6. Snap the lens back in place. Test the light to ensure proper operation
before use.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
