Installation and Operating Instructions PBX-200 PB / Li
page 14
7.2.3
Use the USB connectors (4) (5) and 12 V DC
Figure 6: The DC connectors on the front of the Power-Blox
If you want to use the Power-Blox DC power units, you have the possibility to connect a 12 V
device to the maximum of 3 A (car connection) and two USB devices up to 2.1 A at the front.
7.2.4
Connecting the solar module to the solar socket (8)
As an option, Power-Blox offers a solar cable with two standard MC4 connectors on the primary
side and a special solar plug on the secondary side. You can plug it directly into the Power-Blox.
Figure 7: Connect the solar module via solar cable
To connect the solar plug, turn it slightly to the left until it is completely inserted into the socket
and then turn it back until it snaps.
To release the solar plug, pull the yellow lock lever and then turn the plug to the left until it can
be pulled out.
