Installation and Operating Instructions PBX-200 PB / Li
page 13
7.2
Connections and main switch
The operation of the Power-Blox is very simple:
7.2.1
Main switch (3)
Power-Blox is controlled in normal use by a main control element: the main switch:
ON
ß
à
OFF
The main switch is switched on by tilting to the left (position I). Tilt to the right (position O) turns
off the Power-Blox.
The Power-Blox starts into a boot and measuring cycle after switching on, so it does not deliver
power directly to the integrated sockets (1). Wait approximately one minute for the Power-Blox
to complete all tests and be ready for operation.
7.2.2
Direct connection via integrated sockets (1)
Figure 5: Use of the integrated sockets.
The two integrated AC power sockets deliver directly high-quality 230 V AC, similar to that at
your household socket. You can directly connect commercially available devices. Make sure you
do not exceed the maximum power of the Power-Blox.
