manualshive.com logo in svg

Powell PowlVac 38, Инструкционный бюллетень, Страница: 33 / 35

Поделиться
Скачать
Powell PowlVac 38 Скачать руководство пользователя страница 33

Powered by Safety

®

25

Maintenance

01.4IB.65090A

Do NOT use compressed air to clean the 

device.  This may result in loose dirt or grit 

being blown into bearings or other critical 

parts and causing excessive wear.

!

CAUTION

Either use a vacuum cleaner or wipe with a 

dry lint-free cloth or industrial-type wiper.

Primary insulation, including the insulating 

support plates on which the selector 

switch and grounding switch contacts are 

mounted and the operating rods, should 

also be cleaned.  Wipe clean with a dry  

lint-free cloth or an industrial-type wiper.  

If dirt adheres and will not come off by 

wiping, remove it with distilled water or a 

mild solvent such as denatured alcohol.  Be 

sure that the ground and test device is dry 

before returning it to service.  Do not use 

any type of detergent to wash the surface 

of the insulators, as the detergent may 

leave an electrical conducting residue on 

the surface as it dries.

3)   Lubrication

Powell offer a complete lubrication kit 

(Powlube-104) which contains all the 

lubricants required for maintaining the 

equipment.  Powlube-104 consists of (1) 

A-grease, (1) B-grease, and (1) C-oil.  Prior to 

March 2014, Powell provided Powlube-101 

and Powlube-102 which contained (1) tube 

of Anderol 757 or Rheolube 368A, (1) tube 

of Mobilgrease 28 and (1) bottle of Anderol 

A456 oil.

A - Grease should be lightly applied to 

those bearing surfaces that are accessible.  

Inaccessible surfaces, such as bearings, may 

be lubricated with a light synthetic machine 

oil such as C- Oil.  B - Grease should be 

applied to the electrical contact surfaces.

The contact surfaces of the primary 

disconnect stabs and the fingers of the 

ground shoe should be lubricated with 

a thin film of B - Grease.  Prior to use, 

particularly if the ground and test device 

has been in storage for a long period of 

time, wipe these surfaces with a clean, dry 

cloth, and apply fresh lubricant.

Содержание PowlVac 38




































Отзывы:

Нет отзывов