Powell PowlVac 38 Скачать руководство пользователя страница 13

Страница: 13 / 35

Powered by Safety

Safety

01.4IB.65090A

6. Do not attempt to force or bypass any

interlocks. The interlocks are furnished

for the safety of the operator and the

protection of the equipment being tested

and the test device.

Forcing or bypassing the interlocks can result

in a condition dangerous to the operator

and/or damaging to the equipment.

CAUTION

7. Do not attempt to service the device while

it is installed in a switchgear compartment

or on a lift truck. For service, the device

must be located either on the floor or on a

sturdy, level work bench, and blocked from

rolling.

8. For service, the device must be in the OPEN

position and all operating springs must

be discharged. These conditions should

be verified before removing any covers or

attempting any service.

9. Store the electrically operated ground and

test device in a clean, dry area free from

dust, dirt, moisture, caustic atmosphere,

and vermin.

10. Keep all insulating surfaces, which include

primary support insulation and insulation

barriers, clean and dry.

11. Check all primary circuit connections to

make certain that they are clean and tight.

12. Take extreme care while using this device to

avoid contacting “live” or “hot” (energized)

terminals.

e. S

Afety

ABelS

The equipment described in this document

has

DANGER

WARNING, CAUTION,

and

instruction labels attached to various locations.

All equipment

DANGER

WARNING,

CAUTION,

and instruction

labels shall be observed

when the ground and test device is handled,

operated, or maintained.

Warning and Caution labels are located in

various places. Do NOT remove or deface any

of these warning/caution labels.

NOTICE

Содержание PowlVac 38




































Результаты поиска

Содержание PowlVac 38

Отзывы:

Powell PowlVac 38, Инструкционный бюллетень, Страница: 13 / 35

Результаты поиска

Содержание PowlVac 38

Отзывы: