manualshive.com logo in svg

Powell PowlVac 38, Инструкционный бюллетень, Страница: 10 / 35

Поделиться
Скачать
Powell PowlVac 38 Скачать руководство пользователя страница 10

Powered by Safety

®

2

General Information

PowlVac 38™ CDS Electrically Operated  

Ground & Test Device per ConEd Specification EO-2022-15

 01.4IB.65090A

A.  S

cope

The information in this instruction bulletin 

describes the following PowlVac

 

38™ CDS 

Electrically Operated Ground & Test Device:

•  38GT40CDSD - "Con Ed" Version

•  38GT40CDSE - Con Ed "Customer" Version

The information in this instruction bulletin 

is intended to provide details required to 

properly operate and maintain the  

PowlVac 38 CDS Ground & Test Device 

described in 

Ch 1 General Information, A. Scope

.

This instruction bulletin provides:

1.  Safety guidelines

2.  General descriptions of the operation and 

maintenance of the ground & test device

3.  Instructions for installation and placing the 

ground & test device into service

4.  Instructions for part replacement

5.  Information for ordering renewal parts

6.  Illustrations, photographs, and description 

of the ground and test device

The illustrations contained in this document 

may not represent the exact construction 

details of each particular type of ground and 

test device.  The illustrations in this document 

are provided as general information to aid in 

showing component locations only.  

All photos and illustrations are shown using 

deenergized equipment.

Follow the appropriate safety precautions 

while handling any of the equipment.  Failure 

to do so may result in death or serious injury.

!

WARNING

To the extent required, the products described 

herein meet the applicable ANSI, IEEE, and 

NEMA Standards; however, no such assurance 

is given with respect to local codes and 

ordinances which may vary greatly.

B.  I

nStructIon

 B

ulletInS

 A

vAIlABle

 e

lectronIcAlly

Changes to the instruction bulletin may be 

implemented at any time and without notice.  

Go to 

powellind.com

 to ensure use of the current 

instruction bulletin for Powell equipment.

NOTICE

For more information visit 

powellind.com

.  To 

contact the Powell Service Division call  

1.800.480.7273 or 713.944.6900, or email  

[email protected]

.

For specific questions or comments pertaining 

to this instruction bulletin email  

[email protected]

 with the IB number 

in the subject line.

Содержание PowlVac 38




































Отзывы:

Нет отзывов