9
ASSEMBLY
CHUTE CONTROL INSTALLATION
• Position the discharge chute (1) so that it
faces forward.
NOTE:
Align the arrow (2) on the discharge
chute with the arrow on the housing.
1. Align the holes (3) on the upper chute
control rod (4) with the holes on the lower
chute control rod (5). Insert the hitch pin
(6). Insert the end of the chute control
rod (7) through the keyed hole (8) in the
bracket that is attached to the top of the
middle handle.
• Ensure that the handle (9) of the chute
control rod points upward, and insert the
rod into the keyed hole (10) in the back of
the housing.
1
2
10
• Firmly push the rod into the keyed hole in
the back of the housing until it snaps into
place.
• Rotate the handle on the chute control
rod to ensure that it moves in the same
direction as the chute.
9
4
5
8
7
6
3
