![Poulan Pro PPB40SB Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/poulan-pro/ppb40sb/ppb40sb_instruction-manual_1584655014.webp)
14
MAINTENANCE
SERVICING
Servicing should be performed by a qualified
technician. Replacement parts for this
Snow Thrower must be identical to the parts
that they replace. If repairs are necessary,
contact the Toll-Free Helpline, at 1-855-378-
6903.
NOTE:
Identify the left and right sides of the
Snow Thrower when standing in the normal
operating position.
WARNING:
If the battery pack is
installed into the snow thrower, the snow
thrower could start accidentally while the
operator is performing maintenance on it,
which could cause serious personal injury.
Remove the battery pack before performing
any maintenance.
STORAGE
• Run the snow thrower for a few minutes in
order to melt any snow that may be left on
the snow thrower.
• Wipe the snow thrower off with a dry cloth
before storage. This will help prevent ice
building up on the unit and parts freezing.
• Remove the battery and store it in a cool
and dry location, if possible. Charge the
battery every six months when not in use
in order to increase its life.
• Inspect the snow thrower thoroughly
for worn, loose, or damaged parts. If
any parts must be repaired or replaced,
contact the Toll-Free Helpline, at 1-855-
378-6903.
• Store the snow thrower in a clean, dry
place. Cover it in order to provide added
protection.
• Always store battery and charger indoors.
SCRAPER REPLACEMENT
The scraper is located at the bottom of the
impeller housing.
• Ensure that the battery is not installed in
the tool.
• Remove the screw (1) from each side plate
that holds the scraper and 3 screws (2)
from under the machine that secure the
scraper to the machine.
• Remove and discard the old scraper.
• Install the new scraper, and fasten it
securely with the 5 screws that you
previously removed.
1
1
2