15
MAINTENANCE
DRIVE BELT REPLACEMENT
• Ensure that the battery is not installed in
the tool.
• Remove the 5 screws (1) that secure the
left side plate (2) to the frame of the snow
thrower. Remove the side cover.
• Remove the old belt (3) from the small
pulley (5) and large pulley (4).
• Loop one end of the new belt over the
small pulley.
• Rotate the impeller with the left hand while
positioning the belt on the large pulley with
the right hand.
• Install the left side cover, and secure it
using the 5 screws that you previously
removed.
1
2
5
3
4
