background image

13

OPERATION

OPERATING TIPS 

 

WARNING: 

If the Snow Thrower 

hits a foreign object while it is in use, the 

object could be thrown in the direction of the 

operator or a bystander. Thrown objects could 

cause serious personal injury. Keep the area 

to be cleared free of all foreign objects that 

may be picked up and thrown by the impeller.
•  Keep the area of operation free of foreign 

objects that can become thrown by the 

impeller. Perform a thorough inspection 

of the area since some objects may be 

hidden from view by surrounding snow. 

lf the snow thrower hits an obstruction or 

picks up a foreign object during use, stop 

the snow thrower, remove the battery, 

remove the obstruction, and inspect 

the unit for damage. Repair or replace 

any damaged part before restarting and 

operating the unit.

•  Keep children, pets, and bystanders away 

from the area of operation. Be aware that 

the normal noise of the machine when 

turned on may make it difficult for you to 

hear approaching people.

•  When moving the snow thrower, use the 

wheels on one side as the pivot point. 

Slightly tilt the snow thrower on this pivot 

point to move it forward or backward.

•  Start your clearing path outward, throwing 

snow in a back and forth motion. To 

clear in the opposite direction, pivot the 

snow thrower on its wheels. Make sure to 

overlap clearing paths.

•  Note the wind direction. If possible, move 

in the same direction as the wind so that 

the snow is not thrown against the wind 

(and thus back onto you and on the just 

cleared path).

•  Do not push the snow thrower with 

excessive force. You should push the 

machine gently and at a consistent speed 

in accordance with the unit's throw rate.

•  Some parts of the snow thrower may 

freeze under extreme temperature 

conditions. Do not attempt to operate 

the snow thrower with frozen parts. If the 

parts freeze while the snow thrower is in 

use, stop the snow thrower, remove the 

battery, and inspect for frozen parts. Free 

all parts before restarting or operating the 

snow thrower. Never force controls that 

have frozen.

•  When working on pebbles, gravel, or 

unpaved surfaces, avoid throwing loose 

surface material along with the snow by 

pushing down on the handle to raise the 

scraper at the base of the unit above the 

pebbles or gravel.

•  Cold Weather Operation: Lithium Ion 

batteries can be safely used from 

temperatures ranging from -20 degrees to 

45 degrees Celsius. NOTE: Do not store 

or charge battery outside. Battery must be 

charged and stored indoors prior to use of 

the snow thrower.

•  If the snow thrower does not start initially 

remove battery from snow thrower. Place 

battery on charger and allow to charge 

for 10 minutes. Remove from charger and 

install in snow thrower for use. The start-

up issue may be caused from the battery 

being too cold. To avoid this issue, ensure 

battery is stored in a dry cool place for 

storage and charging and leave indoors 

until ready for use. 

Содержание PPB40SB



















Отзывы: