Page 7/ 10
Assembly Instructions (High position):
13. The bed is assembled in the low position when shipped. If you wish to use it without a box spring, follow the
instructions below:
a. Move the adjustable mattress support rail found below the fix rail at the Side Rail (C) to the higher
location, by removing the Allen Bolts and Washers that were pre-installed. Remove the hardware
with the supplied Allen Key (H), by rotating counterclockwise, as seen in the illustration below.
b. Fasten the mattress support to the holes found at the top of the Side Rail (C), by aligning the Allen
Bolts with the Washers. Secure the hardware by rotating them clockwise with the supplied Allen Key
(H).
