
3-47
PFC-6800 • 5403602 • Rev B • 2/13
PFC-6800 UD-1000 Dialer Installation
Figure 61.
DETAIL D
SCALE 1 : 1
P-Link & Dip Switch Locations
The UD-1000 is connected to the P-Link bus. A four-wire cable (P/N 5210514) is supplied with the UD-1000, which should be
used to connect the
P1
on the UD-1000 and the "
P" connection
on the main panel board (
as shown in the illustrations below
).
Setting Addresses
The UD-1000 must be programmed with an address between one and thirty-one (1–31) to be recognized by the panel.
(Refer to
the "P-Link Addresses" table shown earlier in this section for DIP switch programming.)
UD-1000 Board Showing Dip Switch & P1 Connector / Main Board "P" Connector
Figure 62.
DWG #602-14
DWG #602-13
DETAIL B
SCALE 1 : 1
P Connector
on PFC-6800
main board
DWG #593-33
Line #2
Line #1
P1
Connector
P-Link
Connections
Dip
Switches