Postek G-2108 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 39

Postek G-2108 Скачать руководство пользователя страница 5

G-2108/G-3106 User’s Manual Preface

1

Preface

The  G-2108/G-3106  Light  Industrial  printer  is  designed  to  provide  general-purpose  and
high-performance  printing  capabilities.  Boasting  multiple,  user-friendly  functions  and  high
performance,  the  G-2108/G-3106  printer  stands  out  with  its  modern  appearance  and  excellent
functionality. Carefully designed G-2108/G-3106 units are rugged, durable and easily operated and
maintained.  The  32-bit  embedded  ARM  CPU  and  high-tech  system  platform  delivers  the  highest
quality possible.

This manual explains how to set up and begin using your G-2108/G-3106 printer. It also provides
detailed information on configuring your printer, basic operations, care and troubleshooting.

Please read this manual carefully before using the G-2108/G-3106 printer.

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Alerts you to a medium or low risk hazard that could, if not avoided,
result in moderate or minor injury.

Alerts you to a potentially hazardous situation that could, if not avoided,
result in equipment damage, data loss, performance deterioration, or
unanticipated results.

Provides additional information to emphasize or supplement important points
in the main text.

Version

Version 1.2, published in August, 2021.

«
...
3
4
5
6
7
...
»

Содержание G-2108








































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды