Possl Globecar Summit, Инструкция по эксплуатации

Страница: 72 / 104

70
Motorcaravan - 09/21-0 - GLO-MJ22-00EN
Appliances
10
Selecting the fan level
Selecting the fan level:

Use the rotary/push button (Fig. 58,8) to select the fan level symbol and tap
to change to the setting level.

Use the rotary/push button (Fig. 58,8) to select the desired fan level.

Tap the rotary/push button (Fig. 58,8) to confirm the value.
Setting the timer
Setting the timer:

Use the rotary/push button (Fig. 58,8) to select the timer symbol and tap to
change to the setting level.

Use the rotary/push button (Fig. 58,8) to set the starting time.

Use the rotary/push button (Fig. 58,8) to set the end time.

Set the room temperature.

Set the hot water level.

Select the type of energy (only at heater with electrical heating rods).

Select the fan level (not at automatic air conditioning AUTO).
Activating the timer:

Use the rotary/push button (Fig. 58,8) to activate the timer (ON).

Tap the rotary/push button (Fig. 58,8) to confirm the value.
The timer remains active until it is deactivated (OFF).
When the timer is active, the timer symbol flashes.
Fig. 62 Setting possibilities fan heater
1 OFF - Fan OFF (no appliance being
operated)
2 VENT - Circulating air (no appliance
being operated and hot water proces-
sing OFF)
3 ECO - Low fan level
4 HIGH* - High fan level
5 BOOST - Rapid room heating (if diffe-
rence between selected and actual
room temperature >10 °C)
* Involves higher current consumption,
higher noise level and increased engine
wear.
Fig. 63 Setting possibilities fan air con-
ditioning system
1 OFF - Fan OFF (no appliance being
operated)
2 LOW - Low fan level
3 MID - Middle fan level
4 HIGH* - Highest fan level
5 NIGHT - Quieter fan operation
6 AUTO* - Automatic selection of the
fan level
* At automatic air conditioning manual
selection of the fan level is not possible.
4 5 2 1 3
3 4 5 6 1 2

Danger of poisoning through exhaust gases in closed rooms (e.g.
garage, workshop)!
If the motorhome is parked in closed rooms:

Shut off the fuel supply (gas or diesel) to the heater.

Deactivate the timer of the control unit (OFF).

Switch off the heater at the control unit.