Positive Grid BIAS MODULATION, Руководство по эксплуатации продукта

Страница: 8 / 32

13 14
4. Assign Footswitch
Each footswitch can turn on or off one of the 20 presets
assigned to it in the pedal.
5. Modulation Modules
BIAS Modulation comes with two major modulation modules: time-based and ampli-
tude-based. The time-based module (Module 1) manipulates the delay time inherent in effects
such as Chorus, Phaser, Flanger and so on. The amplitude module (Module 2) dynamically
alters the amplitude (volume) of the signal, creating tremolo or panning effects. With BIAS
Modulation, you can choose to engage just one of these two modulation modules or use both
modules at once to create unique modulation effects.
When only engaging one modulation module, the knobs on the pedal’s control panel control
the module. When engaging both modulation modules at once, the knobs on the pedal’s
control panel control only Module 1 (the time-based module). The Tweak 1 & 2 knobs control
different parameters for Module 1 and Module 2:
For Module 1 (Time-based)
TWEAK 1 - Controls Feedback
TWEAK 2 - Controls Wobble speed (produced by BIAS Modulation’s secondary LFO)
For Module 2 (Amplitude)
TWEAK 1 - Controls Shift
TWEAK 2 - Controls Wobble speed (produced by the secondary LFO)
To understand how the parameters mentioned above work, see the Module 1 and Module 2
sections of this manual.
1. hold the preset knob
2. LED stop blinking
1. switch to other presets
2. LED start to blink
To assign a different preset for a footswitch, just tweak
the Preset knob to switch to another preset. The
footswitch LED will start to blink. Hold the Preset knob
until the LED stops blinking, at which point the preset
mapping will update.